adaptec

Hello,Has anyone confirmed if Adaptec Serial ATA RAID 1210SA works on ESX yet? This is just for testing purpose and not production. I've been searching through the internet for low-cost Serial ATA RAID that has been confirmed works on ESX (LSI Logic MegaRAID 150-4. LSI Logic MegaRAID 150-6. Adaptec 2610SA and possibly Adaptec 2410SA) . After searching for the prices which ranges well over £130 -£300 for the new LSI MagaRAID 300-8X SATA II RAID. So was wondering if anyone has been able to use Adaptec 1210SA successfully on ESX which is just under £50 as i'm about to get one and try on my ESX 3.... Also heard the new version of ESX 3 (3.5 or so) supports SATA drive installation of ESX including the VMFS. VMCORE files.... can anyone confirm cos buying the expensive Controller might be a waste of money if in the long run the new version now fully supports full SATA 150 or SATA II drives installation I'm almost positive that the 1210SA will not work as it implements software RAID ( in hardware ). You can identify controllers that use software raid because they don't use an onbaord cache of which this card has none. I wouldn't waste any money on it. You can pick up an adaptec 2610sa on ebay for around $100USD. In the past I had also been picking up HP P400 w/ 512MiB cache and battery for around $200USD but that seems to be hit and miss lately. Perhaps the supply of them dried up. Cards based on the LSI 1068 chipset also seem to work well and have pretty good performance. There are other options as well such as using NFS and/or iSCSI for a datastore which don't involve buying RAID cards at all. Thanks guys well guess i'll have to get it in the end (Adaptec or LSI MegaRAID). The thing is cant get cheaper NAS box which supports NFS most of then are SMB/CIFS/NTFS and iSCI which i believe will involve running Linux correct me if i'm wrong.... and me coming from a WINTEL background with no knowledge of Linux/Unix environment and Virtualisation been the next boom in the IT industry and have to involved with ESX and not sure wot MS are doing with their MS 2008 virtualisation server which looks ok (based on Vista though and not a fan of it).

Forex Groups - Tips on Trading

Related article:
http://communities.vmware.com/thread/109032

comments | Add comment | Report as Spam

Hey it looks like it liked the aix 79xx drivern the drivers loaded for the scsi separate but now it asks for the media and somehow forgotten it booted from the cd and wants drivers for that - if you choose ftp it wants drivers for the nic. Looks desire the linux kernel that the ESX install CD uses isn't detecting your IDE controller. If you want you can do a network install to get around this air (although you may not be able to use the physical CDROM in any of your VM's if the kernel doesn't detect your IDE controller after ESX is installed). To do a network install just copy the entire contents of the ESX CD to a server with an FTP or HTTP service running and on a network to which the server that you are trying to install has communicate access. If you have a Red Hat/CentOS Linux box on your communicate you can use it. Here are some docs for setting it up:Basically you copy the ESX CD contents to a server and then choose the Install Method you want (FTP/HTTP) and click next. The installer will then ask you for the server hostname/IP communicate and the path to install files. For example if you copy the ESX CD to a Linux box at 10.10.10.10 into directory /var/www/html/esx/ then your method would be HTTP. IP communicate would be 10.10.10.10 and path would be esx/Do a Google search for Red Hat network install (since the ESX installer is based on Red Hat's anaconda installer) and you should be able to get more detailed information if you need it. Good luck That's good info. I'm starting the $3000 course install and config tomorrow. Should learn some more solid info there. So from what I gather the onboard IDE driver is not on the ESX server's hardware compat list. So either I buy a PCI IDE card that is (Q: do you experience a mark name?) or I do this network install via FTP. The communicate install is two fold one I undergo to get the actual redhat drivers for the marvell onboard nic. I've located the files for linux install but heck If I can get the drivers to load. I've been doing the extract of files for years and I get how to extract and where to put the files on the root of the disk. I've copied the contects of common files to a disk without the "H" folder- tried that - nope. I'm a windows guy so I should be able to copy driver to disk and insert disk am I missing some other work that needs to be done? I've reviewed red hat linux install been to both motherboard LAN driver section and MARVELL CHIPSET website as well. Are you trying to run this server in a production environment or just for testing? VMware will only support installations on hardware that is in the HCL. Although it may work initially you never know what kind of results you'll get running non-supported hardware in a production environment. If you want to just install ESX to do testing for your class just install ESX into a VM. transfer VMware Server install it on the OS of your choice create a VM and then edit the VMX file as described in one of these articles:They apply to installing ESX in Fusion (VMware's virtualization production for Mac OS X) but editing the VMX with the appropriate options should allow you to run ESX on pretty much any VMware product (Workstation. Server. Fusion or ESX). If you used the automatic partitioning during installation then I believe you should have at least one vmfs3 volume on which to hold on VMs. You could always re-install do manual partitioning and then create a vmfs3 volume. This is the partitioning scheme I usually use if I do manual:/boot 100M sda1/ 5000M sda2/var/log 2047M sda2swap 1600M sda5vmkcore 100M sda7vmfs3 rest of disk sda6 Hi Kyle so are you seeing no data store in Configuration\Storage or SCSI target in Configuration\Storage Adapters once the install is complete? You may want to try to create the VMFS partition and format it manually. In your case you would need to remove the existing VMFS partition and then act a new one. The vmkfstools format command would need to be altered to match your setup.

Forex Groups - Tips on Trading

Related article:
http://communities.vmware.com/thread/109502

comments | Add comment | Report as Spam

I'm experimenting with the 30-day evaluation license of ESX Server 3.0.2-52542 and I'm having a difficult measure installing it because of my Adaptec SAS-3405 SAS controller. Upon booting the installer in text mode the message "Loading aacraid_esx30 driver..." appears for about 5 minutes before asking me to test the lay CD. I selected "Skip" and then the same "Loading aacraid_esx30 driver..." message returned for many more minutes. Eventually this too timed out and the installer continued. I also undergo an IDE disk in the machine and this is the only control listed when installation reaches the Partitioning go. This is insufficient since it leaves me with nowhere to store guest VM images. I came across a forum post entitled "aacraid_esx30 / Adaptec RAID 2120S" where somebody else had the same problem. No resolution is posted however. I have updated the firmware on my motherboard and the Adaptec SAS controller to the latest available versions and the problem persists. Adaptec lists ESX Server 3 as supporting the SAS-3405 with no additional driver needed. Hi John any develop in this air?. I want to build ESX whitebox using the same Adaptec 3405 SAS controller but unfortunately I did not found any success stories about 3405 SAS to be working on ESX 3 x neither on community forum nor on web Thanks John. Its good to hear indeed! Have you successfully tested 3.0.1 or older release on your HW configuration then? What drop the results? Actually Adaptec has not officially declared any speciffic ESX version in technical pelt for this separate (only command information there). I'm quite afraid of buying this separate without beeing sure if if ordain bring home the bacon or not. I think I'm going to assay and buy this separate. (It will take approx 1-2 weeks according to shipment conditions - to Czech republic). I'm going to try several releases and post the results here - maybe that will bring any significant resolution... Finally. VMware announced to include official support for SATA (in release information) - I'm quite curious about what this will bring. Hello,I undergo a Adaptec RAID SAS 3405 that runs on a VMware ESX 3.0.2 build 52542 with two SATA disc on 500GB; issues: i get MPS open but host is using PIC on my box but i evaluate this error has nothing to do with my Adaptec RAID SAS 3405 because it's up and runing now with vm's. I think the MPS error has something to do with my junk motherboard. Hi,Unfortunatly I have the same problem with esx server 3.01 and 3.5. The latest information about this says that 3405 is not supported by vmware. Adaptec support already is thinking about this problem. If that come true it would be a compel. I believed Adaptec product info about the compatiblity. Has anyone an idea or knows anything alternative? I habe already a intel board s5000v with 3 hotplug sas drives. Costs should be limited. RAID 5 is a must. This problem has also reared it's ugly continue for me as well. I am using an Adaptec 3805 with a combination of SAS and SATA drives each in their own RAID 5 groups. The exact same thing of "loading aacraid_esx30 driver..." for 5-10 mins coming up to the skip CD evaluate act another 5-10 mins and then the lay complains it can sight no hard drives AT ALL. This is of course AFTER looking at the IO compatibilty PDF from VMware stating I am really not impressed. If it's not true or has not been thoroughly tested. I would suggest that VMware please shift it from the documentation as I have invested another $350+ in a card I did not need. Currently I am using an Intel S5000VSA come in with it's own SATA RAID controller on it as come up (it's disabled). When it's enabled. ESX does not see the assail only individual drives.. and although this controller is not in the list of compatible controllers it actually sees more than the supposed compatible controller! If anyone has any additional info that might back up this work please discuss. Thanks! Just an update from my end. I pursued Adaptec support about this who offered a few suggestions. Tried them didn't work - and from that point on they've been ignoring my (repeated) e-mails. a solution was allready open. These Adaptec Controller works very fine but it require a update of the motherboard BIOS. Please go to the intel homepage downloading new BIOS. Thanks to the Adaptec Support too - but I use my press contacts.... Dear Jubalkessler,now I'm approve from CeBit. Germany. Because Adaptec SAS 3405 is a 4 lane Card you be a grade of BIOS because on motherboard there is a 8 lane slot. BIOS-Update on Intel come in desire s5000VSA is very easy. Put in the CD and allow a update internet access assumed. Manual update is available on Second. You need a actual update of BIOS on SAS 3405 available on internet place of Adaptec. Onboard controller on motherboard is disabled. More information uprading BIOS you ordain find on Intel and Adaptec documentation. It is important for Vmware esx server that you use the alter combination of motherboard and controller. Maybe other motherboard than Intel may not bring home the bacon. More information about compatibility you ordain find on vmware domiciliate summon.

Forex Groups - Tips on Trading

Related article:
http://communities.vmware.com/thread/109152

comments | Add comment | Report as Spam

Everything I've seen so far says that the hostRAID software feature found on some Adaptec SCSI controllers (in my inspect on IBM x346 servers) is not supported in 3.0.2. Can someone confirm if this is still true? This becomes an air when I'm trying to use 34 GB drives in a RAID 0 configuration to get enough space on local drives to install VMs for certification purposes. The installation sees it as separate drives. I tried to install a hostRAID driver from IBM's site for RHEL3 U8 using the "esx dd" dominate. But the driver image is too big to fit on a floppy and ESX lay doesn't recognize my usb drive. The only other option I see is to order larger drives for my x346 servers but I'd like to avoid that if possible. This is comfort adjust. Hostraid is more or less a software raid with some ASIC support (most of the logic is in the driver). You can easily see this when using a hostraid adapter in a non Windows system. FreeBSD for example won't see a RAID volume but two independent disks.

Forex Groups - Tips on Trading

Related article:
http://communities.vmware.com/thread/109092

comments | Add comment | Report as Spam

Hi,I be some help. If someone put me on the right track please. I have motherboard Supermicro p4SCT+II with Marvell controller on the come in. I also have Adaptec 39320 SCSI controller 64bit pluged in slot be5 and I connected 2 320 scsi drives on each bring in Raid-0 configuration (total 4 drives)My operating system is XP on Channel A assail on my SCSI. I'm booting from SCSI and I would desire to be that way. Now I would like to connect 2 SATA drives or more to Marvell controller on the come in. It says I ordain be able to cerebrate 6 drives in total. When I switch in BIOS to direct my Marvell as Raid I'm loosing access to my SCSI Adaptec. No detection in BIos and Booting just shows Marvell controller alter. gratify helpThanks In advance!Adam If you alter booting from the Marvell it should work just as it did before with the SATA controller as just a secondary controller rather than a primary boot controller. I believe if you be in the BIOS for something like (in my case at least) Boot from SATA RAID or SCSI you can pick SCSI and undergo it work. This is going to be tricky though with that kind of a setup. Still if it becomes too much for you I'll gladly act those SCSI drives off your hands ChristmasHeaven theme designed by Zardon. DH logo & Artwork may NOT be used without express permission of the Administration aggroup protected under Copyright Law.

Forex Groups - Tips on Trading

Related article:
http://www.driverheaven.net/hardware-discussion-support/148248-booting-not-detecting-adaptec-39320-scsi-controller-after-enabling-marvell-raid.html

comments | Add comment | Report as Spam

Loss from continuing operations net of taxes computed on a generally accepted accounting principles (GAAP) basis for the second quarter of fiscal 2008 was ($7.5) million or ($0.06) per share compared with income of $48.8 million or $0.36 per share for the second quarter of fiscal 2007. GAAP net loss for the second accommodate of fiscal 2008 was ($7.6) million or ($0.06) per share compared with a net income of $51.1 million or $0.38 per overlap for the back up quarter of fiscal 2007. Included in our GAAP results for the back up accommodate of fiscal 2007 was a one-time tax benefit of $49.1 million which was the prove of dispute settlements with the United States and Singapore taxing authorities. The U. S administer of these settlements brought to end our fiscal 1997 U. S. Tax Court litigation. "While our top lie results were above the company's expectations we continue to face difficult market conditions," explained S. "Sundi" Sundaresh president and CEO of Adaptec. "Despite these challenges the affiliate has made significant progress during the quarter in several key areas: our restructuring intend announced measure quarter is on bring in to fully cognise the expected savings by the end of the fiscal year; our Data Protection and Storage Solutions groups have each released new products and the early indicators of customer reaction are positive; and we reached an agreement with brace Partners and together. I evaluate we will pursue a course designed to increase value for all of our stockholders." Non-GAAP loss from continuing operations net of taxes for the back up accommodate of fiscal 2008 was ($2.4) million or ($0.02) per share compared with non-GAAP income from continuing operations net of taxes of $5.2 million or $0.04 per overlap for the second quarter of fiscal 2007. The non-GAAP results for the second accommodate of fiscal 2008 as defined below in the divide "Use of Non-GAAP Financial Measures," differ from results measured under GAAP as they do away with stock-based compensation expense amortization of acquisition-related intangible assets restructuring costs other charges or gains and tax differences due to GAAP versus non-GAAP measurements. A complete reconciliation between GAAP and non-GAAP information referred to in this release is provided in the attached tables at the end of this touch release. The Adaptec back up quarter fiscal 2008 earnings conference call is scheduled for 1:45 p m. Pacific measure on October 31. 2007. Individuals may participate via webcast by visiting 15 minutes prior to the label. A telephone replay of the teleconference will be available through November 15. 2007 by calling (888) 203-1112 in the U. S or (719) 457-0820 internationally and referencing reservation number 9047128. This news release includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 as amended and Section 21E of the Securities and Exchange Act of 1934 as amended. Forward-looking statements are statements regarding future events or the future performance of Adaptec and include statements regarding our expectation of fully realizing the expected savings from our restructuring intend announced last quarter by the end of the fiscal year anticipated positive customer reaction to the new products released by our Data Protection and Storage Solutions groups and the ability of Adaptec and Steel Partners to bring home the bacon together to maximize value for all of our stockholders. These forward-looking statements are based on current expectations forecasts and assumptions and bear on a be of risks and uncertainties that could create actual results to differ materially from those anticipated by these forward-looking statements. These risks include: if we do not cater our restructuring objectives we may have to act to apply additional plans in request to decrease our operating costs; achieving necessary give from the assure manufacturers to whom we have outsourced manufacturing assembly and packaging of our products; retaining key management; Adaptec's ability to open new software products; difficulty in forecasting the volume and timing of customer orders; reduced demand in the server network storage and desktop computer markets; our aim markets' failure to accept or delay in accepting network storage and other advanced storage solutions including our SAS. SATA and iSCSI lines of products; decline in consumer acceptance of our current products; the timing and volume of orders by OEM customers for storage products; our ability to control and manage costs associated with the delivery of new products; and the adverse effects of the intense competition we face in our business. For a more end discussion of risks related to our business compose is made to the section titled "Risk Factors" included in our Quarterly Report on Form 10-Q for the quarter ended June 30. 2007 on register with the Securities and Exchange equip. Adaptec assumes no obligation to update any forward-looking information that is included in this channel.

Forex Groups - Tips on Trading

Related article:
http://snapserver.blogspot.com/2007/11/adaptec-reports-second-quarter-fiscal.html

comments | Add comment | Report as Spam

Welcome to LinuxQuestions org a friendly and active Linux Community. You are currently viewing LQ as a guest. By joining our remove community you ordain undergo access to affix topics acquire our newsletter use the advanced examine bid to threads and find many other special features. Registration is fast simple and absolutely free so gratify. !say that registered members see fewer ads and ContentLink is completely disabled for all logged in members. If you have any problems with the registration affect or your be login gratify. 0000:00:0b.0 entertain connect: Apple Computer Inc. UniNorth AGP0000:00:10.0 VGA compatible controller: ATI Technologies Inc act 128 PF/PRO AGP 4x TMDS0001:10:0b.0 entertain connect: Apple Computer Inc. UniNorth PCI0001:10:0d.0 PCI connect: Digital Equipment Corporation DECchip 21154 (rev 05)0001:11:02.0 SCSI storage controller: Adaptec AHA-2940U2/U2W0001:11:07.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)0001:11:08.0 USB Controller: Apple Computer Inc. KeyLargo USB0001:11:09.0 USB Controller: Apple Computer Inc. KeyLargo USB0001:11:0a.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)0002:21:0b.0 entertain bridge: Apple Computer Inc. UniNorth Internal PCI0002:21:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM) (rev 01) I've done some reading and apparently the Adaptec AHA-2940U2/U2W uses the aic7xxx driver which I undergo successfully loaded using modprobe aic7xxx such that lsmod now lists it as being show. What do I do from this inform? There are three 16GB hard drives attached to the SCSI separate and I want to experience how to access them. Can anyone give any information?Many thanks,- Perps. [ 0.000000] Using PowerMac forge description[ 0.000000] Total memory = 256MB; using 512kB for chop table (at cff80000)[ 0.000000] Linux version 2.6.17-10-powerpc (grow@royal) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Tue Dec 5 22:00:09 UTC 2006 (Ubuntu 2.6.17-10.34-powerpc)[ 0.000000] Found initrd at 0xc1900000:0xc1ea4000[ 0.000000] Found UniNorth memory controller & entertain connect @ 0xf8000000 revision: 0x08[ 0.000000] Mapped at 0xfdfc0000[ 0.000000] Found a Keylargo mac-io controller rev: 3 mapped at 0xfdf40000[ 0.000000] PowerMac motherboard: PowerMac G4 AGP Graphics[ 0.000000] Found UniNorth PCI entertain bridge at 0xf0000000. Firmware bus be: 0->0[ 0.000000] open UniNorth PCI entertain bridge at 0xf2000000. Firmware bus number: 0->1[ 0.000000] open UniNorth PCI entertain bridge at 0xf4000000. Firmware bus number: 0->0[ 0.000000] via-pmu: Server Mode is disabled[ 0.000000] PMU driver v2 initialized for Core99 firmware: 0c[ 0.000000] nvram: Checking bank 0...[ 0.000000] nvram: gen0=60 gen1=59[ 0.000000] nvram: Active tip is: 0[ 0.000000] nvram: OF divide at 0x210[ 0.000000] nvram: XP divide at 0x1220[ 0.000000] nvram: NR divide at 0x1320[ 0.000000] Top of RAM: 0x10000000. Total RAM: 0x10000000[ 0.000000] Memory hole size: 0MB[ 0.000000] On node 0 totalpages: 65536[ 0.000000] DMA zone: 65536 pages. LIFO group:15[ 0.000000] Built 1 zonelists[ 0.000000] Kernel dominate lie: grow=/dev/hda3 ro change intensity splash [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000 max 4 CPUs[ 0.000000] mpic: ISU size: 64 alter: 6 mask: 3f[ 0.000000] mpic: Initializing for 64 sources[ 0.000000] PID hash delay entries: 2048 (order: 11. 8192 bytes)[ 0.000000] GMT Delta construe from XPRAM: 480 minutes. DST: off[ 0.000000] time_init: decrementer frequency = 24.907533 MHz[ 0.000000] time_init: processor frequency = 450.000000 MHz[ 30.980693] Console: act upon dummy device 80x25[ 30.981105] Dentry lay aside hash table entries: 32768 (order: 5. 131072 bytes)[ 30.981598] Inode-cache chop table entries: 16384 (request: 4. 65536 bytes)[ 31.002886] High memory: 0k[ 31.002901] Memory: 249532k/262144k available (2748k kernel label. 12280k reserved. 432k data. 300k bss. 172k init)[ 31.003173] Calibrating decelerate loop... 49.66 BogoMIPS (lpj=99328)[ 31.080478] Security Framework v1.0.0 initialized[ 31.080505] SELinux: Disabled at boot.[ 31.080548] Mount-cache hash delay entries: 512[ 31.080923] device-tree: Duplicate name in /cpus/PowerPC,G4@0 renamed to "l2-cache#1"[ 31.081024] device-tree: Duplicate label in /cpus/PowerPC,G4@1 renamed to "l2-cache#1"[ 31.083103] checking if visualise is initramfs.. it is[ 32.619288] Freeing initrd memory: 5776k freed[ 32.621245] NET: Registered protocol family 16[ 32.621607] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000[ 32.621623] channel 0 bus <multibus>[ 32.621630] channel 1 bus <multibus>[ 32.621663] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/pci-bridge@d/mac-io@7/i2c@18000[ 32.621674] channel 0 bus <multibus>[ 32.621705] PMU i2c /pci@f2000000/pci-bridge@d/mac-io@7/via-pmu@16000[ 32.621715] bring 1 bus <multibus>[ 32.621722] channel 2 bus <multibus>[ 32.621789] PCI: Probing PCI hardware[ 32.626369] NET: Registered protocol family 2[ 32.656519] IP route cache chop table entries: 2048 (order: 1. 8192 bytes)[ 32.656758] TCP established hash table entries: 8192 (order: 3. 32768 bytes)[ 32.656869] TCP attach chop delay entries: 4096 (request: 2. 16384 bytes)[ 32.656923] TCP: chop tables configured (established 8192 bind 4096)[ 32.656933] TCP reno registered[ 32.657000] Thermal assist unit using timers shrink_timer: 500 jiffies[ 32.659085] analyse: initializing netlink socket (disabled)[ 32.659119] audit(1189907464.675:1): initialized[ 32.659391] VFS: plough quotas dquot_6.5.1[ 32.659446] Dquot-cache chop table entries: 1024 (order 0. 4096 bytes)[ 32.659592] Initializing Cryptographic API[ 32.659610] io scheduler noop registered[ 32.659627] io scheduler anticipatory registered[ 32.659643] io scheduler deadline registered[ 32.659678] io scheduler cfq registered (default)[ 32.660247] PCI: Enabling device 0000:00:10.0 (0086 -> 0087)[ 32.661148] aty128fb: remove ROM signature 1111 should be 0xaa55[ 32.661169] aty128fb: BIOS not located guessing timings.[ 32.661187] aty128fb: Rage128 PF PRO AGP [chip rev 0x1] 16M 128-bit SDR SGRAM (1:1)[ 32.695794] Console: switching to colour close in buffer device 128x48[ 32.695819] fb0: ATY Rage128 close in buffer device on act128 PF PRO AGP[ 32.783337] Generic RTC Driver v1.07[ 32.783456] Macintosh non-volatile memory driver v1.1[ 32.783727] mice: PS/2 mouse device common for all mice[ 32.785674] RAMDISK driver initialized: 16 RAM disks of 65536K coat 1024 blocksize[ 32.786443] MacIO PCI driver attached to Keylargo chipset[ 32.789115] input: Macintosh mouse add emulation as /class/enter/enter0[ 32.789509] furnish Multi-Platform E-IDE driver Revision: 7.00alpha2[ 32.789525] ide: Assuming 33MHz system bus go for PIO modes; override with idebus=xx[ 32.789680] adb: starting probe assign...[ 32.789697] adb: finished investigate assign...[ 33.808391] ide0: Found Apple KeyLargo ATA-4 controller bus ID 2 irq 19[ 33.808420] Probing IDE interface ide0...[ 34.096690] hda: QUANTUM FIREBALLP LM30.0. ATA plough control[ 34.768400] hda: Enabling Ultra DMA 4[ 34.769471] ide0 at 0xd1014000-0xd1014007,0xd1014160 on irq 19[ 35.788384] ide1: Found Apple KeyLargo ATA-3 controller bus ID 0 irq 20[ 35.788406] Probing IDE interface ide1...[ 69.575546] ide1: act for create from raw material failed before investigate ![ 79.988323] hdc: no response (status = 0x80) resetting control[ 115.212275] hdc: no response (status = 0x80)[ 116.568276] ide2: Found Apple KeyLargo ATA-3 controller bus ID 1 irq 21[ 116.568295] Probing IDE interface.

Forex Groups - Tips on Trading

Related article:
http://www.linuxquestions.org/questions/showthread.php?t=584758

comments | Add comment | Report as Spam

Look for paper towels , linens, bath towels, and more at TowelTown.com
stop by anytime

comments | Add comment | Report as Spam

Cyberstar Infocom Ltd introduces Adaptec's Serial AttachedSCSI (SAS) and Serial Attached ATA (SATA) products in India. Adaptec SATAstorage products combine high capacity with performance that is much fasterthan tape - all for a much displace cost-per-gigabyte than primary storage. Optimized for capacity. SATA is ideal for disk-to-disk backup and nearlinestorage of fixed reference data that must be kept readily accessible Adaptec'srange of Serial Attached SCSI (SAS) builds on the proven SCSI protocol toprovide performance reliability flexibility and massive scalability. With SATA and SAS drives now interconnectedthrough Unified Serial controllers enterprise users can now create tieredstorage solutions on a single architecture. Available in entry level determine andperformance lines. Adaptec range of SAS and SATA products furnish world-classperformance at exceptional price points. As a move of its extensive market outreachprogram. Cyberstar will care focused dealer and end customer trainingprograms on advantages of implementing SATA and SAS into their unified storagearchitectures. Special pricing schemes and dealer promotions have also been drawnas a move of this aggressive program. The entire product line is availableimmediately through Cyberstar and its authorized reseller partners across 26locations in India.

Forex Groups - Tips on Trading

Related article:
http://www.businessgyan.com/content/view/3325/

comments | Add comment | Report as Spam

Like Adaptec's current GuardianOS this is Linux-based but where GuardianOS supports NAS and iSCSI. OnTarget is iSCSI-only and can only serve up block storage not files. Get a real-time look beneath the ascend in the with our tools and. Also see our original real-time tracking system. NEW! Show current Digg news on your communicate or website with a. It's super customizable. &write; Digg Inc. 2007 — User-posted content unless obtain quoted. -->DIGG. DIGG IT. DUGG. DIGG THIS. Digg graphics logos designs page headers button icons scripts and other service names are the trademarks of Digg Inc.

Forex Groups - Tips on Trading

Related article:
http://digg.com/linux_unix/Adaptec_targets_SANs_with_iSCSI

comments | Add comment | Report as Spam

Cyberstar Infocom one of India’s leading distributors of IT products has announced the immediate availability of Adaptec’s market-leading range of Serial Attached SCSI (SAS) and Serial Attached ATA (SATA) products in the country. In inspect you are wondering. Adaptec happens to be the leader in the worldwide SATA market with 38% merchandise share and with 79% share in the SAS merchandise as per the Gartner 2006 report. Adaptec’s SATA storage products combine high capacity with performance and that too at a much displace cost-per-gigabyte than traditional primary storage devices. According to Raj Rathi the founder and CEO of Cyberstar Infocom. “Adaptec has a long history of simplifying complex storage technologies and making them affordable and accessible to a wide range of businesses through solutions that increase storage functionality and determine.” The SATA devices from Adaptec are ameliorate for disk-to-disk backup and near lie storage of fixed reference data that must be kept readily accessible. Adaptec’s be of Serial Attached SCSI (SAS) builds on the proven SCSI protocol to provide performance reliability flexibility and massive scalability. With SATA and SAS drives now interconnected through Unified Serial controllers enterprise users can now create tiered storage solutions on a single architecture. Adaptec’s range of SAS and SATA products are available in entry level value and performance lines. “Adaptec’s latest range of SAS and SATA products will be available in India just when consumers are adopting SATA on a wider scale into their enterprise IT infrastructures,” continued Rathi The entire Adaptec line of SATA and SAS products are immediately available through Cyberstar and its authorized resellers across India. XHTML: You can use these tags: <a href="" call=""> <abbr title=""> <acronym call=""> <b> <blockquote cite=""> <label> <em> <i> <touch> <strong>

Forex Groups - Tips on Trading

Related article:
http://www.techshout.com/hardware/2007/11/adaptec-sas-sata-products-immediately-available-in-india-via-cyberstar-infocom/

comments | Add comment | Report as Spam

CyberStar has announced the availability of Adaptec’s new be of Serial Attached SCSI (SAS) and Serial Attached ATA (SATA) products in the Indian merchandise. A worldwide leader in the SATA merchandise. Adaptec delivers SATA storage products with high capacity and performance. Moreover the devices match the be for disk-to-disk backup as come up as near line storage of fixed reference data which should be kept readily accessible. It is said that the performance of the products is much faster than tape and much lower cost-per-gigabyte than the primary storage devices. Raj Rathi the fail and CEO of Cyberstar Infocom remarks “Adaptec has a long history of simplifying complex storage technologies and making them affordable and accessible to a wide range of businesses through solutions that increase storage functionality and determine. Adaptec’s latest be of SAS and SATA products will be available in India just when consumers are adopting SATA on a wider measure into their enterprise IT infrastructures.” The SAS range has been built on the SCSI protocol that offers performance reliability flexibility and massive scalability. When SAS and SATA drives are interconnected with one another via Unified Serial controllers it helps the enterprise users to act tiered storage solutions on a single architecture. Adaptec’s be of SAS and SATA products is currently available through Cyberstar and its authorized reseller partners across 26 locations nationwide. All the products are available in entry-level determine and world-class performance lines. This entry was posted on Wednesday. September 12th. 2007 at 3:52 amand is filed under. You can drop to the end and get a response. Pinging is currently not allowed. XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <label> <em> <i> <strike> <strong>

Forex Groups - Tips on Trading

Related article:
http://www.techgadgets.in/storage/2007/12/cyberstar-intros-adaptec-sas-sata-drives-in-india/

comments | Add comment | Report as Spam

Look. I experience that server virtualization is hot right now and that the storage guys want to go along for the ride.  I like DataCore’s announcements in connection with VMworld since they are bragging about actual customer successes with their products: they have seen a big uptick in sales undergo seen of their “SAN” virtualization play in concert with VMware deployments.  I also desire what LeftHand has done in adding their clustering story to a VMware environment.  That company is moving closer every day to becoming a software-only play.  That said we undergo open VMware ESX to be well kind of buggy and painful to care in our lab tests.  I would go cautiously a few servers at a time in setting up this environment — especially if you be to benefit on their supposed campus clustering solution which in my view ain’t quite soup yet.  But that’s just me always finding the bad in what everyone wants to view as the greatest thing since sliced bread. What I really hope doesn’t happen is the passing without notice of important news from Adaptec about its Snap Server 700i Series product family.  Guys for hosting SQL Server or transfer Server this kit is the bomb.  Great performance numbers excellent resiliency good scaling story and you can’t defeat the price the 700i family is a potential hit out of the lay in iSCSI targets with SAS/SATA internals.

Forex Groups - Tips on Trading

Related article:
http://www.drunkendata.com/?p=1344

comments | Add comment | Report as Spam

iSCSI got a boost today with Adaptec's addition of the 700i Series Snap Server appliances which adds vertical iSCSI scalability up to a possible 36TB with a mix of SATA and SAS disks. From day one it also supports Windows. VMWare and Linux. This gives Adaptec the advance over its enjoin iSCSI competitors in several respects. merchandise faith in iSCSI is growing because it provides good performance with a much lower determine tag than fibre channel (FC) and without most of the complexity that comes with FC connection. However. Adaptec has further boosted performance by introducing a new Linux-based operating system: OnTarget OS. Don Chouinard. Adaptec's systems storage assort director of marketing told me: "This takes find straight drink to blocks to utilise the Adaptec RAID separate [hardware RAID SAS controller]; it effectively pushes the operating system to one side." This he said dramatically increased performance for iSCSI (only) with benchmark tests showing three times competitive raw performance as come up as better price-performance on a like-for-like copy comparison in most cases. If you then feed in the 700i's alter lead in vertical scalability—with the ability to add capacity on the fly—and greater flexibility in supporting any mix of abstain SAS and lower be SATA plough there are reasons to think Adaptec could have a high-seller on its hands—as desire as supporting iSCSI alone is no problem. In this believe. Chouinard confirmed that Adaptec had no plans to phase out the long-established Guardian OS used by the other mouth Server models which also supports NAS (CIFS. NFS and AFP). Of particular interest to MS Windows users running applications such as transfer. SQL Server or Oracle is the ability to run synchronous mirroring between two Snap Server 700i series appliances connected to the application servers through an IP SAN; redundant Gigabit Ethernet cabling plus switches will then maximise uptime for high availability. Plans for mirroring in a Linux environment should arrive fruition in the first half of next year. Another Windows positive is provision of accelerated backups not involving the application servers if MS VSS hardware snapshots are stored on the 700i and exposed to a backup server on the IP SAN. There are three 1U high rack-mounted models. The 720i provides 1 or 2TB SATA drives. 730i 3TB SATA and the 750i 1.2TB 15,000 rpm SAS drives. Expansion comes through adding a 2U Adaptec SANbloc S50 chassis each chassis housing 12 hot-swappable SATA or SAS drives. Estimated US pricing range is $8,000 (1TB 720i)–$23,300 (1.2TB SAS 750i with 4 GigE network ports). Set-up wizards ordain alter set-up reduce deployment measure while snapshot software bundled with each model can be used to auto-schedule recovery points throughout the day. All in all the 700i be looks to be neat and uncomplicated while also potentially blowing the performance socks off competitors in its determine be.

Forex Groups - Tips on Trading

Related article:
http://www.it-director.com/r/c/9780/f/fd_itadm_0

comments | Add comment | Report as Spam

India-based IT products distributor Cyberstar Infocom Ltd. has launched the Unified Serial RAID Controllers from Adaptec Inc a global leader of trusted storage solutions which furnish the broadest choice in performance data protection and be for next generation PCIe (PCI convey) connectivity. The latest line-up of Adaptec Unified Serial RAID controllers the maximum varieties for connecting to high-capacity Serial ATA (SATA) drives and high-performance Serial Attached SCSI (SAS) drives which includes redundant path failover and a low-profile create calculate that is ameliorate for high-density servers and workstations. Raj Rathi. Managing Director Cyberstar Infocom said. “Unified Serial RAID controllers enable interconnect between SATA and SAS drives on a hit storage architecture delivering exceptional value and performance to consumers.” Rathi added. “We are very bullish about the prospects of this product line in India”. The Adaptec Unified Serial Controllers is available in four models namely design RAID 3405. assail 3085. assail 31205 and assail 31605. While the RAID 3405 and Raid 3805 are low-keyed in create by mental act and go with four and eight internal ports respectively. The assail 31205 and RAID 31605 undergo 12 and 16 internal ports respectively The significant features of the Adaptec RAID 31205 (Product No. 2252400-R) and assail 31605 (Product No. 2252700-R) are: RAID 31205 - 12 internal ports; RAID 31605 - 16 internal ports All the above mentioned Adaptec Unified Serial Controllers provide the highest data protection available including RAID levels 0. 1. 1E. 5. 10. 5EE. 6. 50. 60 plus one-view management with Adaptec Storage Manager across all Adaptec assail Controllers and the broadest operating system give such as Windows Vista. The Adaptec range of Unified Serial RAID Controllers is available alter away via Cyberstar and its authorized reseller partners across 26 locations in India. In addition as part of its wide merchandise outreach initiative. Cyberstar ordain displace out focused dealer and end customer training programs on advantages of implementing Unified Serial RAID controllers into their storage architectures. What’s more special pricing schemes and dealer promotions have also been developed as a part of this major program. XHTML: You can use these tags: <a href="" call=""> <abbr call=""> <acronym title=""> <b> <blockquote cite=""> <label> <em> <i> <strike> <strong>

Forex Groups - Tips on Trading

Related article:
http://www.techshout.com/hardware/2007/03/new-range-of-adaptec-unified-serial-controllers-released-in-india-by-cyberstar/

comments | Add comment | Report as Spam